Documents & Downloads

The Equalizer shapes your audio by adjusting frequency bands to enhance or reduce specific sound elements.

Tip: Start flat, make small 2-3dB adjustments, use reference tracks you know well.

Crossover directs specific frequencies to appropriate speakers for optimal performance.

• High-Pass Filter: Frequencies above cutoff point — for tweeters
• Low-Pass Filter: Frequencies below cutoff point — for subwoofers
• Band-Pass Filter: Specific frequency range — for midrange speakers

Tip: Subwoofer cutoff ~80Hz, Tweeter start ~2kHz. Test with various genres.

Synchronize sound from multiple speakers. Critical in cars where speaker distances vary.

1. Measure distance from each speaker to listening position
2. Convert to milliseconds (1 foot ≈ 1ms)
3. Input values into delay settings per speaker
4. Fine-tune while listening to music

Tip: Use a test mic or sound meter for precise time alignment.

Precisely adjust output level for each speaker to create a balanced soundstage.

1. Start with all levels at neutral position
2. Play a reference track and listen for imbalances
3. Adjust individual speaker levels until cohesive
4. Use a sound level meter for precise measurement

Ensure sound waves from different speakers reinforce rather than cancel each other.

• In-phase: Waves reinforce — stronger, clearer sound
• Out-of-phase: Waves cancel — weak, hollow sound

Tip: Toggle phase 0/180 per speaker while playing music. Choose the setting with fuller bass.

Save preferred settings for different listening environments or music genres.

1. Complete all EQ, crossover, delay, and level adjustments
2. Navigate to Presets section in the software
3. Save with descriptive name (e.g., "Rock", "Jazz", "Podcast")
4. Switch between presets anytime based on mood or genre

Tip: Share presets with the Alchimist community for collaborative tuning.